Seagull #REC2

   #REC2 – Control / Power / Imagination.

Seagull #REC2 is a second edition of our popular Sony camera / camcorder controller. With #REC2 it is possible to supply power to the camera via on-board interface which extends the usage greatly for those long mapping and surveillance jobs! #REC2 now features configurable INPUT modes such as PWM or SBUS – which helps to limit the amount of wiring on UAV platforms. Last but not least users are able to adjust the desired Timelapse interval and when combined with #SYNC2 the precision between photos are within microseconds!

#REC2 Features:

• USB Power Supply – extend the usage time of your camera!
• Video Record – START / STOP
• Shutter Release – photo capturing MANUAL / AUTOMATED
• Zoom Control – IN / OUT with variable speeds
• Manual Photo – separate stages for Focus and Shutter Release
• Timelapse – user defined interval for Shutter Release
• Shutter Feedback – #SYNC2 support for microsecond  Timelapse precision
• Digital Capture – *shutter release only for Sony camcorders
• Selectable Input – control via PWM / SBUS interfaces
• Camera ON / OFF

What it does

Seagull #REC2 supports the following functions

• INPUT SELECTION ( PWM or SBUS based INPUT to control modes )
• RECORD VIDEO ( START and STOP )
• SHUTTER RELEASE ( Capture photos via MANUAL or AUTOMATED activation )
• ZOOMING ( Variable speeds for ZOOM IN and OUT )
• MANUAL PHOTO ( 3 stage trigger mode NEUTRAL / FOCUS / SHUTTER )
• TIMELAPSE ( User defined interval repeated shutter release )
• SHUTTER FEEDBACK ( Support for #SYNC2 for microsecond Timelapse precision )
• Camera ON/OFF ( Turn camera ON or OFF – depending on previous state )
• Digital Capture ( *Shutter release ONLY for Sony CAMCORDERS )

What it supports

The following hardware is supported

Flight Controllers:

• Pixhawk 1
• Pixhawk 2.1
• Pixracer
• APM 2.6
• APM 2.5
• DJI Wookong
• DJI A2
• DJI A3

– and many others with camera support

R/C radio systems:

• Systems that are capable of outputting standard PWM signal (almost every RC) or SBUS based interfaces

What you get

The following is part of this product

• 1 x Seagull #REC2
• 4 x Servo cables ( 30cm length )

 – all the support you could wish for !

Specifications

Details for Seagull #REC2

• Voltage: 3.9 – 12V (5 volts recommended – do NOT exceed 12V!)
• Current draw: 30.6mA (PS-DISABLED)
• Input signal: SBUS or Standard R/C PWM servo signal ( between 1000 – 2000uS )
• Dimensions: 39.5mm x 21.5mm x 10.5mm
• Weight: 8g