Product Carousel Tabs
Foxeer 5.8G Reaper Extreme 2.5W 40CH VTx
| Name | Reaper Extreme |
| Input Voltage | 7~36V |
| Output Voltage | 5V |
| Channels | 40CH |
| Power | 25mW/200mW/500mW/1.5W/2.5W, red light flash 1/2/3/4/5 times correspondingly |
| Pit | Double click to enter |
| Weight | 13g |
| Size | 36*27.5*8mm |
| Consumption | 1.2A/9V |
Holybro Power Distribution Board (PDB)
Description:
This Power Distribution Board (PDB) is used for PM02, PM02D or similar Power Modules. Power modules with build-in power distribution such as the PM03, PM06, PM07 would not require this PDB. There are two options, with or without XT30 pre-soldered. The option with XT30 pre-soldered goes perfectly with the ESC & Motor on the X500 V2.
Foxeer 5.8G Reaper Extreme 2.5W 40CH VTx
| Name | Reaper Extreme |
| Input Voltage | 7~36V |
| Output Voltage | 5V |
| Channels | 40CH |
| Power | 25mW/200mW/500mW/1.5W/2.5W, red light flash 1/2/3/4/5 times correspondingly |
| Pit | Double click to enter |
| Weight | 13g |
| Size | 36*27.5*8mm |
| Consumption | 1.2A/9V |
Holybro Power Distribution Board (PDB)
Description:
This Power Distribution Board (PDB) is used for PM02, PM02D or similar Power Modules. Power modules with build-in power distribution such as the PM03, PM06, PM07 would not require this PDB. There are two options, with or without XT30 pre-soldered. The option with XT30 pre-soldered goes perfectly with the ESC & Motor on the X500 V2.
Foxeer 5.8G Reaper Extreme 2.5W 40CH VTx
| Name | Reaper Extreme |
| Input Voltage | 7~36V |
| Output Voltage | 5V |
| Channels | 40CH |
| Power | 25mW/200mW/500mW/1.5W/2.5W, red light flash 1/2/3/4/5 times correspondingly |
| Pit | Double click to enter |
| Weight | 13g |
| Size | 36*27.5*8mm |
| Consumption | 1.2A/9V |
Holybro Power Distribution Board (PDB)
Description:
This Power Distribution Board (PDB) is used for PM02, PM02D or similar Power Modules. Power modules with build-in power distribution such as the PM03, PM06, PM07 would not require this PDB. There are two options, with or without XT30 pre-soldered. The option with XT30 pre-soldered goes perfectly with the ESC & Motor on the X500 V2.
